Home > News > Auto LED headlight conversion kits news > 如何测车灯强度是否达标?找堵墙即可测!
Contact Us
YIKE OPTOELECTRONIC CO.,LTD.



Address: 3rd Floor, R/D Complex Building,TsinghHi-tech Park, Hi-tech Industrial Park(North),Nanshan, Shenzhen,China, 518057

Tel: 86-755-27616858

Fax: 86-755-27652567

Email: info@yikelight.com
Contact Now
Hot Products
News

Congratulations to Yike Optoelectronics for passing the ITAF16949 international standard quality man

After years of preparation and system improvement, in November 2018, the IATF16949 international standard quality management system certification was ...

2018 Spring Canton Fair Invitation

2018 Spring Canton Fair will begin on April 15th,welcome to visit our booth 2.1Y77/2.1Y78, we will show several new products there including car LED h...

Yike-Cnlight Automechanika Shanghai 2017 Booth 4.2F85

Welcome to Yike-Cnlight Booth for Automechanika Shanghai 2017! Booth Number:4.2F85Date:November 29th ~ December 2nd, 2017Add:National Exhibition and C...

Invitation for MIMS Automechanika Moscow 2017

We Yike will go to the automechanika MIMS moscow exhibition (August 21st~24th), welcome to visit our booth NO. R385 in Hall 7.3. New arrival automoti...

2017武汉国际博览中心展

2017武汉国际博览中心展 6月16至6月18于武汉国际博览中心展

New Arrival!! Yike iLens 5000K CREE 8000lm Bi-LED projector lens screw thread version with black fr

New Arrival!! Yike iLens sereis 5000K Cree chips 8000lm bi-LED projector retrofitting lens screw thread version with black frame. Welcome to your inqu...

C05A series 9004 9007 H/L LED headlights conversion kits in mass production

C05A Series 9004 9007 H/L LED headlight conversion kits in mass production, smaller size with perfect light beam, welcome your inquiry!

2017AAITF深圳春季展-益科雪莱特LED汽车灯隆重亮相

2017AAITF深圳春季展 第十四届国际汽车服务行业展览会(2017AAITF深圳展)2月15日于深圳会展中心隆重举行 益科及雪莱特公司展位现场人气暴涨,盛况空前,益科新...

Notice for Chinese New Year Holiday

Dear All, Due to Chinese New Year is coming, we will have a holiday from January 20th to February 6th, 2017, any inquires for car LED headlight kits a...

Yike-Cnlight C05A Series car LED headlight bulb kits in large batches production Now!!

Just back from New Year Holiday, we Yike New C05A car LED headlight bulbs are in large batches production now, 32MM smaller size, easier installation,...

News

如何测车灯强度是否达标?找堵墙即可测!

  • 广州日报
  • 2015-02-09 10:44:16

汽车远光灯是夜晚驾驶,以及能在糟糕气候条件下,保证汽车安全行驶的非常重要的一个关键部件。不少车主都喜欢“加大加强”远光灯,但这里首先提醒车主的是,会车时开启远光灯不仅不礼貌,而且会引发安全事故,所以是绝对不可取的。

  不过,对于自己爱车的远光灯,是否达到行驶安全要求?其实不一定要去专业汽车维修点,自己找“一堵墙”拭一下即可搞掂。


  车主可以在一个晚上,将车停在一堵白色的墙边。让车头与墙体尽量垂直,最好保持10米左右的距离。然后将车灯打开,并且用厚布遮住一个车灯,以便逐一调整两侧的前灯。

  这时,车内以不载重为好,这样车灯调整时才比较均衡。否则车尾重的话,灯光会向上射,如果车体向前倾的话,灯光又会向下射。建议找一位朋友坐在车内,这样不仅能够保持适当的载重,而且可以保持自己驾车时的射灯水平。

  车灯打开以后,将灯光在墙面上的投影用粉笔记录下来,无论左右车灯都应该与汽车的正中的中轴线保持等距离。如果发生向外偏或者向内偏的现象,就必须根据汽车使用手册中的提示,用螺丝刀来调整。至于车灯光束的高度,右车灯应该完全地水平直射,而左车灯则应该向上调高10厘米。注意千万不能将车灯调校太高,这样会照花对面司机的眼睛,增加危险因素的存在。

  除了高度以外,车灯光照的宽度也可以调节,可以将右车灯光束调得略微向右偏,这样在能见度极低的雨雾天,对右侧路面会看得更加清楚,确保行车的安全。